![]() ![]() ![]() It uses the H84A-8 pulling head for -8 diameter rivets, and the H701B-456 pulling head with 744-300 adapter for -4, This tool and the G704B power riveter will install -4,-5 and -6ĭiameter CherryMax rivets, using the H701B-456 straight, H753A-456 right angle or H782 offset pulling heads. The newest, smallest and lightest weight pneumatic tool is the G747. What power tool models should I use to install CherryMAX® rivets? What is the meaning of "456" on Cherry pulling heads? -456 indicates the the pulling head is capable of installing the 4 diameter (1/8"), 5 diameter (5/32") and 6 diameter (3/16") CherryMax rivets. Use only Cherry recommended tool systems with Cherry fasteners. Use of commercial riveting tools frequently results in poor aerospace fastener installations,Īnd may require removal of the fastener for replacement. These stems must have pulling serrations that match the serrations in the installation tool pulling heads To determine the minimum material thickness we subtract 1/16" - arrivingĬan I use commercially available installation tools to install Cherry aerospace fasteners?Ĭommercial riveting tools are designed to install softer stem, non-serrated commercial rivets.Ĭherry aerospace fasteners use hardened stems to meet the performance values required in the relevent procurement specifications. To further explain - 05 is 5/16" maximum material thckness. For example a CR rivet will have a material thickness or The typical industry accepted range between grip lengths are measured in 1/16" increments. How are grip lengths of blind rivets established? How are "diameters" of blind rivets measured? The term "diameter" refers to the nominal measurement of the rivet shank in 1/32", thus a 4 diameter rivet would be 4/32 or 1/8". I need further information on the Cherry® Rivetless Nut Plate?. ![]() Technical Support Frequently Asked Questions ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |